Instruction for the Tube Tester Type W 19

Titel Instruction for the Tube Tester Type W 19
Tags
  • Bedienungsanleitung
  • W 19
Hersteller Funke (Adenau)
Breite × Höhe 104 mm × 199 mm
Seitenanzahl 16

Versionen der Bilder dieser Seite:

Text auf dieser Seite

The accessories mentioned in the following instructions are shown in the two pictures on the following pages.

1 = fuse holder with 1 amp. 20 mm long and 5mm diameter.

2 = Test Cards contained in

3 = Test Card Compartment

4 = Pins for keeping the Test Cards in position.

5 = Plug’s which are put in the Holes of the Test Card and in this way make the necessary connections.

6 = Jacks for connecting a Speaker for the Noise Test.

7 = Test Switch for making all Tests and Measurements in the right sequence.

8 = Moving Coil Meter with an impedance of 1000 ohms per volt with

9 = Zero Adjustment.

10 = Control Window which starting with position 2 of the Test Switch is illuminated by the voltage Regulator Tube.

11 = Fault Range „F“ at the left side of the Zero Point.

12 = Tube to be tested.

13 = Tube and Test Card Index contains the Standard (ABC) and the American-Tubes
More lists are contained in the test card compartment.

← Alle Dokumente anzeigen